Please refer to our generic CDI installation instructions before installing any CDI box.

For the RM02042, there is some specific installation instruction listed below : 

  1. Before installing the part, make sur that you turn the ignition key to off. The CDI can be damage if the key is not at off.
  2. Locate your OEM CDI box in the back of your ATV
  3. Unplug both connectors and install your new CDI Box.

You are now ready to go !

Number of wire : 5
Number of plug : 2
Height: 75 mm
Width : 50 mm
Thickness: 22 mm