There are no particular installation instructions for this stator.
Please refer to our generic stator installation instructions.
RM06007-External Ignition Coil
Remove spark plug caps from your OEM external ignition coil.
Screw caps on the new external ignition coil.
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.
Number of wires : 7
Number of terminals : 7
Alternator : White between each White = 0.8 ohms+/- 20%
Alternator : White to Ground = O.L. ON DISPLAY
Pickup : Green to Blue = 450 ohms+/-20%
Position Sensor : Red to White/Blue 0.4 ohms+/-20%
Number pf plug: 3
Number of pins : 18
Bracket center to center: 125 mm
Width: 95 mm
Thickness: 26 mm
The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.
External ignition coil
Bracket center to center: 60 mm