There are no particular installation instructions for this regulator. 

Please refer to our Voltage Regulator Rectifier: Generic Installation Instructions 


Our CDI may use a different wire color code then you're original. 

All of the wires are installed in the correct order; please do not change any of the wiring configurations. 

This CDI is designed as a direct plug-in replacement and should be used as such.

Number of plugs: 2
Number of pins: 5
Height: 22mm
Length: 74mm
Thickness: 80mm

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box

Regulator Number of wires :8
Number of pins : 8
Bracket center to center: 68 mm
Thickness: 22 mm
Height: 80 mm