There are no particular installation instructions for this stator.

Please refer to our generic stator installation instructions.

RM06003- External Ignition Coil 

Remove the yellow wire from the external ignition coil, if it is not applicable to your model. 

Number of wires : 7
Number of terminals : 7
Alternator : White Between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Pickup : Red to White= 500 ohms+/-20%
Source : Green to Black = 300 ohms+/-20%

Number of plug : 2
Number of pins : 14
Width: 27 mm
Length: 142 mm
Height: 95 mm

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

External Ignition Coil
Bracket to bracket center 55 mm