There are no particular installation instructions for this stator.
Please refer to our generic stator installation instructions.
RM03800- Regulator Rectifier
Bolt regulator to frame.
Ground black wire to frame or harness ground.
Connect yellow wire to AC output lead of stator.
Source 1 : Green to Red 12 = ohms+/-20%
Pickup 1 : White/Green to White/Red = 115 ohms+/-20%
Alternator : Yellow to Black = 0.4 ohms+/-20%
External Ignition coil
Bracket center to center: 90 mm
Number of wires : 2
Width: 15 mm
Height: 45 mm