There are no particular installation instructions for this stator.
Please refer to our generic stator installation instructions.
EXTERNAL IGNITION COIL
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.
STARTER RELAY SOLENOID
Number of wires : 7
Number of terminals : 7
Alternator : White Between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Pickup : Red to White= 500 ohms+/-20%
Source : Green to Black = 300 ohms+/-20%
External ignition coil
Bracket to bracket center 55 mm