There are no particular installation instructions for this stator.
Please refer to our generic stator installation instructions.
RM06007-External Ignition Coil
1. Remove spark plug caps from your OEM external ignition coil.
2. Screw caps on the new external ignition coil.
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.
STATOR CDI BOX IGNITION COIL GASKET KIT
ALTERNATOR White between each White 0.8 ohms ±20%
ALTERNATOR White to Ground O.L. ON DISPLAY
PICKUP 1 Green to Blue 450 ohms ±20%
POSITION SENSOR Red to White/Blue 0.4 ohms ±20%
The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.
-External Ignition Coil
Bracket center to center: 60 mm