RM30001-Regulator


There are no particular installation instructions for this regulator. 


Please refer to our Voltage Regulator Rectifier: Generic Installation Instructions 


RM02006-CDI 


Our CDI may use a different wire color code then you're original. 

All of the wires are installed in the correct order; please do not change any of the wiring configurations. 

This CDI is designed as a direct plug-in replacement and should be used as such.



CDI REGULATOR RECTIFIER KIT

-Regulator

Six pins

Bracket center to center 70 mm

Thickness 25 mm

Height 85 mm

 

-CDI

One plug

Five wires

Width: 50 mm

Length: 25 mm

Height: 25 mm

 

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.