There are no particular installation instructions for this stator.
Please refer to our generic stator installation instructions.
External Ignition Coil
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.
Stator, Ignition Coil Kit
ALTERNATOR White between each White 0.4 ohms ±20%
ALTERNATOR White to Ground O.L. ON DISPLAY
PICKUP Green to Blue 450 ohms ±20%
POSITION SENSOR Orange to White/Blue 0.2 ohms ±20%
Exterior Diameter: 115mm
EXTERNAL IGNITION COIL
Bracket to bracket center 55 mm