RM01033-Stator

There are no particular installation instructions for this stator.


Please refer to our generic stator installation instructions.



RM03800-Regulator 


1. Bolt regulator to the frame. 

2. Ground black wire to frame or harness ground. 

3. Connect yellow wire to AC output lead of the stator.



STATOR 200 WATT FLYWHEEL PULLER IGNITION COIL (OUT OF STOCK)

-Stator

Six wires

Six terminals

ALTERNATOR Yellow to Black 1.4 ohms ±20%

PICK UP Green/White to Red/White 115 ohms ±20%

SOUCE Red to Green 12  ohms ±20%

 

-External Ignition Coil

Bracket center to center: 90 mm

 

-Fly wheel

Diameter: 130 mm

 

-Regulator

Two wires

Width: 15 mm

Height: 45 mm