RM01033-Stator

There are no particular installation instructions for this stator.


Please refer to our generic stator installation instructions.



RM03800-Regulator 


1. Bolt regulator to the frame. 

2. Ground black wire to frame or harness ground. 

3. Connect yellow wire to AC output lead of the stator.



STATOR 200 WATT PULLER IGNITION COIL KIT

-Stator

Six wires

Six terminals

ALTERNATOR Yellow to Black 0.4 ohms ± 20%

PICKUP 1 White/Green to White/Red 115 ohms ± 20%

SOURCE 1 Green to Red 12 ohms ± 20%

 

-External Ignition coil

Bracket center to center: 90 mm

 

-Regulator

Two wires

Width: 15 mm

Height: 45 mm