When installing the RM01060 stator, please re-solder original harness following original color codes, except on the pickup coil.


For the pickup coil color codes, please solder (white to white/red) and (white/red to white).


When bolting stator in, always use locking compound. When you re-installing the pickup coil, always make sure the air gap is correct. We suggest as close as possible no less the 0.010.



STATOR

Eight wires

Eleven termianls

ALTERNATOR Yellow to Yellow/Red 0.4 ohms ±20%

ALTERNATOR Yellow to Yellow/BLack 0.4 ohms ±20%

PICK UP White/Red to White 115 ohms ±20%

SOURCE COIL Black/Red/Red 225 ohms ±20%