When installing the RM01058 stator, please re-solder original harness following original color codes, except on the pickup coil.

For the pickup coil color codes, please solder (white to white/red) and (white/red to white).

When bolting stator in, always use locking compound. When you re-installing the pickup coil, always make sure the air gap is correct. We suggest as close as possible no less the 0.010.


Seven wires

Nine terminals

ALTERNATOR Yellow/Red to Yellow 1.2 ohms ± 20%

PICK UP White/Red to Red 115 ohms ± 20%

SOURCE Black to Red 18 ohms ± 20%

Brown is ground