Start a new topic

Pick up pulsar coil: Generic Installation Instructions

 

Not following these instructions may result in damaging the part or other components on your vehicle.


Our pick up pulsar coil may use different wire colors code then your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This pick up pulsar coil is designed as a direct plug-in replacement and should be used as such.


1. Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.

 

2. Rotate the fly wheel by hand so the raised nod is lined up with the pick up / pulsar coil and adjust as close as possible, but no less than 0.010"


1 person has this question
Login or Signup to post a comment